BIBLIOTEKA Builder Gel No. 06 Shell FILTER - Shell

Builder Gel No. 06 Shell FILTER is a semi-transparent creamy beige shade designed to create a soft tinting effect on the natural nail plate.

FILTER BUILDER GEL is a medium-viscosity builder gel.

The pigmentation level in this collection has been reduced to create a subtle filter effect. The shade does not fully cover the natural nail; instead, it enhances and tones it like a translucent colour filter.

The gel is easy to control during application, self-levels smoothly and creates an even surface without product build-up. It allows the nail to be structured almost to a finished state, minimising the need for filing.

Suitable for nail levelling, strengthening and extensions.

Benefits

• Medium viscosity for a comfortable working speed.
• High self-levelling properties for near-finished application with less filing.
• Balanced strength and flexibility, helping to prevent cracking, chipping and lifting during wear.
• Minimal filing required after curing.
• More comfortable curing with reduced heat release*.
• Compatible with bases and primers from most professional systems.
• TPO-free formula.

*Provided that the product is applied in the correct thickness.

Technical Specifications

• Type: Builder Gel
• Effect: Semi-transparent
• Viscosity: Medium
• Self-levelling: High
• Flexibility: Moderate
• Hardness: High
• Dispersion layer: Leaves a sticky inhibition layer after curing
• Curing time: LED – 60–90 seconds / UV – 120–180 seconds
• Volume: 30 ml

Directions for Use

1. Prepare the natural nail plate using the appropriate mechanical and chemical preparation.
2. Apply a thin layer of SCOTCH BASE or RUBBER BASE using rubbing motions.
3. Apply a thin slip layer of BUILDER GEL, working it into the surface with rubbing motions.
4. Add a larger bead of gel to build the nail structure and allow 1–3 seconds for the product to self-level.
5. Cure for 60–90 seconds in an LED lamp or 120–180 seconds in a UV lamp.
6. Remove the inhibition layer and perform minimal filing if required.
7. Finish with colour and/or top coat according to the recommended application system.

Precautions

Avoid skin contact. Store tightly closed at a temperature between +5 °C and +25 °C. Keep away from direct light and out of reach of children.

The product is sensitive to UV and LED light. During application or content creation, do not leave the open container under a curing lamp or in direct sunlight, as this may cause premature curing.

Use only as directed.